Akukho nyibilikisi yeoyile yokumelana ne-solvent, ipeyinti yesakhiwo echasene nokubola kwe-epoxy Umfanekiso obonisiweyo

Ipeyinti ye-epoxy echasene ne-solvent ayinyibilikisi ioyile

Inkcazo emfutshane:

Yipeyinti yezinto ezimbini, iQela A lenziwe nge-epoxy resin eguquliweyo, i-polyurethane resin kwaye yongezwa nge-pigment quartz powder, i-arhente encedisayo, njl.njl. ukwenza iQela A, kunye ne-agent ekhethekileyo yokulungisa njengeqela B.

Thumela i-imeyile kuthi

IINKCUKACHA EZINGAKUMBI

*Ividiyo:

*Iimpawu zeMveliso:

1, Musa ukuba nezinyibilikisi eziphilayo eziguquguqukayo, umxholo ophezulu oqinileyo;
2, Ubushushu begumbi obuphilisayo yi-5-45 ° C ifilimu yokupenda enamathelayo kakhulu, iipropati ezibalaseleyo zoomatshini, ulwakhiwo olulula;
3, Ifilimu iqinile, inokumelana kakuhle kwamanzi, ukumelana neoyile, ukumelana ne-asidi elungileyo, ukumelana ne-alkali, ukumelana nesinyibilikisi, ukumelana neekhemikhali kunye nokubola;
4, Ifilimu yepeyinti inokumelana namaqondo obushushu aphezulu ukuya kuthi ga kwi-200 ° C.

*Ukusetyenziswa kweMveliso:

Ifanelekile kwizixhobo zentsimbi, imibhobho enganyangekiyo ngamanzi, ioyile kunye neekhemikhali;
Isetyenziswa kakhulu kwimibhobho, kwiitanki, kwiitanki, emhlabeni wekhonkrithi, ekulweni nokugqwala, kwilindle, emanzini okusela, kwimibhobho yamanzi, kwimibhobho yesinyithi, kwimibhobho yekhonkrithi.

*Iinkcukacha zoBugcisa:

Into	Umgangatho
Umbala kunye nembonakalo yefilimu yepeyinti	Umbala, ifilimu yepeyinti egudileyo
Ixesha Lokomisa (23℃)	Umphezulu owomileyo≤4h, Owomileyo Oqinileyo≤48h
Umxholo Oqinileyo, %	≥80-100
Ubukhulu befilimu eyomileyo, um	200
Ubunono, μm	≤100
Amandla empembelelo, kg/cm	≥50
Ukunamathela (75℃, 7d)	1-2
Ukuguquguquka, mm	≤1.0
Ubunzima, H	≥2
Ukuxinana, okwesibini	50-80
Ukumelana namanzi, iiyure ezingama-48	Akukho gwebu, akukho mhlwa, akukho kuqhekeka, akukho kuxobuka.
Ukumelana nomthamo, i-MPa	≥25
Ukumelana netyuwa engathathi cala (1000h)	≤1
Sebenzisa uBomi	20℃	35℃
	imizuzu engama-60	imizuzu engama-40

GB/T 31361-2015

*Indlela yokwakha:

1, Isitshizi esingenamoya kunye nebrashi okanye i-roller coating yokupeyinta okanye ukulungisa indawo encinci;
2, ayifanelekanga ukutshiza ngendlela yesintu.

*Unyango Lomphezulu:

Umphezulu ongafakwanga i-primer kufuneka utshaywe okanye utshiswe ngesanti ukuya kwinqanaba le-Sa2.5, kwaye ungadityaniswa nee-primer ezahlukeneyo zevenkile kunye nee-primer zokuthintela umhlwa.

*Iphakheji:

Ipeyinti: 20Kg/Ibhakethi
Iarhente yokuphilisa/iHardener: 4Kg/Ibhakethi

Iimveliso eziNxulumeneyo

Ukunamathela okuphezulu okulwa nomhlwa kunye ne-epox yokulwa nokugqwala ...
Ipeyinti ephakathi ye-epoxy ye-MIO yokulwa nokugqwala...
Ipeyinti yokumelana neoyile ye-epoxy anti-corrosion st ...
Inkqubo yepeyinti yokulwa nokugqwala i-Epoxy Red Oxide Pri ...
I-Epoxy Coal Tar Pitch ekumgangatho ophezulu eQinileyo ...