Umgangatho we-Industrial High Solid Selfleveling Epoxy Resin Floor Coating

*Ividiyo:

*Iimpawu zeMveliso:

1, Amandla amahle okubopha kunye nomaleko wesiseko, ukuncipha kokuqina kuphantsi kakhulu, kwaye akulula ukuqhekeka;

2, Ifilimu ayinamthungo, kulula ukuyicoca, ayiqokeleli uthuli, iintsholongwane;

3, Izinto eziqinileyo eziphezulu, ubukhulu befilimu enye;

4, Akukho nyibilikisi, ubuthi bokwakha, amandla aphezulu, ukumelana nokuguguleka, ukumelana neempembelelo;

5, Ihlala ixesha elide,inokumelana nokuqengqeleka kweefolokhwe, iinqwelo kunye nezinye izixhobo ixesha elide;

6, Ukuchasana nokungena kwamanzi, ukumelana neekhemikhali, ukumelana nokugqwala okunamandla, ukumelana kakuhle neoyile namanzi;

7, Ukusebenza kakuhle kunye nokulinganisa, eneempawu ezintle zokuhombisa;

8, Ifilimu eqinisiweyo kubushushu begumbi, kulula ukuyigcina;

9, Ukugcwala, umphezulu ogudileyo, imibala etyebileyo, kunokuyihombisa indawo yokusebenza.

*Ukusetyenziswa kweMveliso:

Iipeyinti zomgangatho ezizilinganisayo ze-epoxyzisetyenziswa kwiindawo apho kufuneka ucoceko oluphezulu, uthuli olungenatyhefu, olumelana namabala kunye nokugqitywa okugqwesileyo kweekhemikhali, oomatshini, kunye nokucoca okulula.Izicelo eziqhelekileyo zokupenda umgangatho we-epoxy self-levelingziquka iifektri ze-elektroniki, iifektri zokucubungula ukutya, iifektri zamayeza ezisemgangathweni we-GMP, izibhedlele, iilebhu, ukufikelela, izakhiwo zikawonke-wonke, iifektri zecuba, izikolo, ii-hypermarket, iindawo zikawonke-wonke, kunye neentlobo ngeentlobo zeefektri.

*Iinkcukacha zoBugcisa:

GB/T 22374-2008

*Unyango lomphezulu:

• 1. Umgangatho omtsha wesamente: Umgangatho omtsha wesamente uhlala ufuna ukugcinwa ujikeleze, kwaye kuthatha iiveki ezingaphezu kwezimbini ehlotyeni. Qinisekisa ukuba amanzi aguquguquka ngokupheleleyo, umxholo wamanzi yi-≤ 8%, kwaye isamente iguquguquka ngokupheleleyo.
  Iyaqina ukuya kutsho kumandla afunekayo somaleko wesiseko.
• 2, umgangatho omdala: ingaba amandla omhlaba ayahlangabezana na neemeko zokubeka umgangatho we-epoxy. Umgangatho osisiseko uneegobolondo ezingenanto okanye ezixobukayo, ekufuneka ziqhekezwe ngokupheleleyo kwaye zisuswe de umgangatho uqine kwaye uqine. Umbala wokuqala kufuneka uvavanywe, kwaye uyahambelana nepeyinti yomgangatho eza kwenziwa, ukuze kugqitywe ukuba ingaba isetyenziswa ngqo okanye isuswe ngokupheleleyo ngaphambi kokuba kwakhiwe.

• 3. Indawo eyonakeleyo: Ngaphambi kokuba ulungise i-primer yokwakha, lungisa nge-epoxy mortar, kwaye uqwalasele ngokupheleleyo amandla ayo okubopha kunye namandla ayo.
• 4. Qinisekisa ukuba umhlaba wokwakha ucocekile, womile, uqinile kwaye awunathuli.

• 5. Umhlaba onamafutha kufuneka uhlanjwe uze womiswe ngesinyibilikisi sendalo (amanzi eTianna, i-xylene, njl.njl.); ukuba ezi zinyibilikisi azifumaneki, umaleko we-samente slurry ungancitshiswa ngokuthe ngqo phezulu.
• 6. Khusela iikona okanye ezinye iindawo ezingadingi kupeyintwa ukuze kuthintelwe ukudaya.

*Ukugcinwa kunye nexesha lokugcinwa:

1, Gcina kwindawo enobushushu obungange-25°C okanye kwindawo epholileyo neyomileyoKuphephe ukukhanya kwelanga, amaqondo obushushu aphezulu okanye indawo enomswakama ophezulu.
2, Yisebenzise ngokukhawuleza xa ivuliwe. Akuvumelekanga ngokupheleleyo ukuyiveza emoyeni ixesha elide emva kokuba ivuliwe ukuze kuthintelwe ukuchaphazela umgangatho weemveliso. Ixesha lokugcinwa kwayo ziinyanga ezintandathu kubushushu begumbi obungama-25°C.

*Iphakheji:

Ipeyinti：20Kg/Ibhakethi;
I-Hardener: 5Kg/Ibhakethi; okanye Yenza ngokwezifiso.