I-Metallic ye-Peetic Peet Uv I-UV I-UV yokunyangwa, i-anti combossion piration sping

* Idatha yezobugcisa:

* Iimpawu zeMveliso:

• Iipropathi ezomisayo ezikhawulezayo kunye nenqanaba elifanelekileyo lokuqinisekisa.
• Ukuzinza okuthe nkqo kunye nokunamatheza.
• Ukuphuhliswa kokwenza umphezulu wepeyinti yepeyinti yangaphambi kwazo zonke iintlobo zeenkqubo ze-AutoMosting.
• Nikezela nge-adhesion elungileyo phakathi kwengubo kunye neempawu ezilungileyo zesanti.

* Isicelo semveliso:

1, isebenza kwi-MALI YOKUGQIBELA kwaye icocwe kwiintlungu eziphakathi, ipeyinti yentsusa okanye umphezulu wepeyinti. Kunye nezinto ezisezantsi ezithambileyo kunye ne-suble.

2, inokusetyenziselwa ukutshiza okwethutyana kweemoto ezintsha okanye ukulungisa iimoto ezindala.

* Unyango lomphezulu:

Ifilimu yepeyinti endala eye yalukhuni kwaye ityhilwe, umphezulu kufuneka wome kwaye ungabi nazingcolongo ezifana negrisi.

* Imeko yokwakha:

I-1.Basese Chease ingaphantsi kwe-5 ° C, i-suidity ye-85% (iqondo lobushushu) lifanele lilinganiswe kufutshane nezinto ezisesikweni), imvula, ikhephu, umoya kunye nemvula.

2.Yenangoko ukupeyinta ipeyinti, ukucoca umhlaba onamava ukuthintela ukungcola kunye neoyile.

3.Imveliso inokutshitshiswa, kuyacetyiswa ukutshiza ngezixhobo ezizodwa. Ububanzi be-Nozzle yi-1.2-1.5mm, ububanzi befilimu bungama-40-6um.

* Indlela yokwakha:

I-1.Sokia kangangoko kunokwenzeka, amatyala akhethekileyo anokubetha ihlathi;

2.Uyipende kufuneka idityaniswe ngokulinganayo ngexesha lokwakha, kwaye ipeyinti kufuneka ichithwe ngesinyibilikisi esikhethekileyo kuhlobo olufunekayo.

3.Ukusebenza, umphezulu kufuneka womile kwaye ucocwe uthuli.

4. I-2SpRARRAY 2-3 izabetho, zinokuqhekezwa emva kweeyure ezili-15.

* Iphakheji kunye nokuThunyelwa:

Ipeyinti: I-1l ipakishwe kwibhokisi yokuthumela kwelinye ilizwe, i-18 yeetoti okanye iitoti ezi-4 ngebhokisi nganye.