Indawo yangaphakathi nangaphandle ye-wangaphandle yodonga lokudibana kwe-glue

* Vedio:

* Iimpawu zeMveliso:

1.The coating is colorless, transparent, and will not damage the original wall decoration effect after coating, and will not turn yellow, dust, dust, etc.
Ukuchasana, ukuxhathisa, ukumelana ne-UV, i-ozone, i-acid kunye ne-alkali ukunganyangeki, kunye noluhlu olubanzi lwemozulu; ixutywe ne-modifiers ekhethekileyo kunye ne-surfacants.
3.Ifilimu ehlambileyo ineepropathi ezintle zefilimu, ukunamathela okuqinileyo, ukuqina kunye nokuchasana noxinzelelo oluvelisiweyo xa ungqameko olusisiseko lutshatile kwaye waqhekeka.
4.Uya kumanzi njengoko iphakathi, ayinamandla, engenabungozi, engenabungozi, ayingcolise indalo esingqongileyo, kwaye yimveliso enobuhlobo kwindalo.
Ulwakhiwo lwedlelo, ukusebenza ngokukhuselekileyo kunye nolwakhiwo olulula. Inokutshintshwa, ipeyintiwe, ityhafile okanye ikhutshelwe ngqo eludongeni.
I-6. Umthamo ophantsi kunye neendleko eziphantsi.

* Ukusetyenziswa kwemveliso:

I-1. Ukulungiswa kwamanzi okuvuza kodonga lwangaphandle lwezakhiwo ezahlukeneyo, i-anti-corrosion, ifilimu yokuthambisa amanzi, i-marble, i-marble, esekwe, njl.
I-2. Ukuchasana nokunyanzelwa kwamanzi kunye nokuthuka kwamanzi izinto ezingafakwanga njengezixhobo, i-ceramics kunye neglasi.
3. Umphezulu ongezantsi, iindonga zophahla olutsha kunye nezidala, iinxalenye ezinobunzima, iinxalenye ezinzima kunye neminye indawo yokuhombisa efana nokulwa amanzi

* Unyango olusisiseko:

I-1. Umphezulu kufuneka ube the the flethi, oqinileyo, ococekileyo, ococekileyo, uthuli kunye nezinye izilwanyana ezivunyiweyo.
2. Ii-voids ezicacileyo kunye nemingxunya yesanti kufuneka ivalwe ngohadi wesamente, ukunyibilika, kunye nemiphetho ebukhali kufuneka isuswe.
3. Ukumanzisa umhlaba kwangaphambili kude kungabikho manzi eminye.
I-4. Ikhonkrithi esandula ukutyhulisa kufuneka ibe nexesha elithile lonyango lokuthintela ifuthe le-Shrinkate.
I-5. Umhlaba wekhonkrithi endala makanziwe ngamanzi acocekileyo kuqala, kwaye upeyintwe emva komile

* Iiparamitha zemveliso:

* Indlela yokwakha:

I-1. Ukupheliswa kwamanzi odonga lwangaphandle lwe-Porcelain: Umphezulu osisiseko ucocekile, womile, owomileyo, ongenalo kwaye atshintshelwe i-Woodcomb ephezulu, ibrashi ye-Suby okanye i-Super-sub
2. Ikhonkrithi esekwe kwisamente: Iphuli yokuqubha kunye nendawo yesiseko kufuneka ibe mncinci, iqinile kwaye yomile. Ukungalingani kunye neemfuno kufuneka ukrokrelwa kwe-itopprof yamanzi. Ngokubanzi, amaxesha ama-2 ukuya kwi-3-3 yokutyibilika banele. Xa ukuxubha, nikela ingqalelo kwindibano yokuqala eyomileyo kwaye ungayithiki ezandleni zakho, emva koko uyisebenzise kwakhona, kwaye ulwalathiso olubrashi kufuneka lube ngamatye. Ixesha lokuphumla phakathi kweendawo ziya kubakho xa ungqimba lwangaphambili lwefilimu ohamba-nye womile kwaye unganamatheli, kwaye eyona nto iphambili yokuphamba ayiyi kudlula iiyure ezingama-36. I-COATE YOBUCHULE BOKUGQIBELA Kwimeko yemo yemvula kunye nendawo emdaka, ukwakhiwa akulunganga.
3. Emva kokuba kugqityiwe ukwakhiwa kwamanzi, onke amalungu eprojekthi kufuneka ahlolwe ngononophelo, ngakumbi imifuno yethayile yodonga lwangaphandle, kwaye ukungqubana, njl. Fumana isizathu sengxaki kwaye uyilungise ngexesha.

* Ukuthuthwa kunye nokuGcina:

1. Khusela ilanga kunye nemvula, ivenkile kwindawo eyomileyo nengenayo umoya. Iqondo lokugcina leSper akufuneki lingaphantsi kuneqondo lobushushu lovavanyo (- ℃) lokuchazwa ngokuhambelana, kwaye akufuneki ukuba ngaphezulu kwe-50 ℃. Ukugcinwa ngokuthe nkqo.
2. Phantsi kweemeko eziqhelekileyo zokugcina kunye nezothutho, ixesha lokugcina lonyaka omnye ukusuka kumhla wemveliso.

* Iphakheji:

I-20 / 5kg nganye;
I-UNIDER YOKUGQIBELA: I-1KG Coating 5 sqm
Imbonakalo: i-mildy encinci ye-visty ye-whicous
Umgangatho oLawulayo: I-JC / T474-2008