I-Acrylic Enamel Lacquer Thinner Ipeyinti Yemoto Ukuxuba Ipeyinti Yemoto Nge-Thinner

*Iidatha yobuGcisa:

*Iimpawu zeMveliso:

. Yenza ukulungiswa ngokukhawuleza okusebenzayo
.Yehlisa iziphene zepeyinti
. Ukuguquguquka kwezixhobo zokumisa
.Ukusetyenziswa kwezinto ngokufanelekileyo

*Usetyenziso lweMveliso:

I-1, isebenza kwipeyinti ephantsi ephantsi kwaye ecociweyo ephakathi, ipeyinti yokuqala okanye umgangatho wepeyinti we-2K.Kwaye izinto ezithambileyo ezisekelwe kwi-insulating layer.

I-2, ingasetyenziselwa ukutshiza inxalenye yeemoto ezintsha okanye ukulungiswa kweemoto ezindala.

*Unyango lomphezulu:

Ifilim yepeyinti endala eyenziwe lukhuni yaze yapolishwa, umphezulu kufuneka wome kwaye ungabi nabumdaka obufana negrisi.

*Indlela yokwakha:

1.Tyaza kangangoko kunokwenzeka, iimeko ezikhethekileyo zinokuba yi-brush coating;

2. Ipeyinti kufuneka ixutywe ngokulinganayo ngexesha lokwakhiwa, kwaye ipeyinti kufuneka ihlanjululwe nge-solvent ekhethekileyo kwi-viscosity efunekayo ekwakheni.

3. Ngexesha lokwakha, umphezulu kufuneka wome kwaye ucocwe ngothuli.

4.Spray 2-3 layers, unokupolisha emva kweeyure eziyi-15.

*Umqathango woKwakha:

1.Base lobushushu nahayi ngaphantsi kwe-5°C, ukufuma okunxulumene nama-85% (iqondo lobushushu kunye nokufuma okunxulumeneyo kufuneka kulinganiswe kufutshane nemathiriyeli esisiseko), inkungu, imvula, ikhephu, umoya nemvula aluvumelekanga ngokungqongqo ulwakhiwo.

2.Ngaphambi kokupeyinta ipeyinti,coca indawo egqunyiweyoukuphepha ukungcola kunye neoli.

3.Imveliso inokutshizwa, kucetyiswa ukutshiza ngezixhobo ezikhethekileyo.Ububanzi bombhobho yi-1.2-1.5mm, ubukhulu befilimu yi-40-60um.

*Ipakethe kunye nokuThunyelwa:

Ipeyinti: 1L Ipakishwe kwikhathoni eqhelekileyo yokuthumela ngaphandle, iitoti ezili-18 okanye iitoti ezi-4 ngebhokisi.